#E STUDIO 3555 SEPARATION ROLLER REGISTRATION#

#E STUDIO 3555 SEPARATION ROLLER REGISTRATION#

Causes: Registration sensor DRV board LGC board Rollers.Description: Paper remaining on the transport path: The multiple feeding of preceding paper caused the misfeeding of upcoming paper (redetection after no jam is detected at ).Sensor check (Perform the input check: 03-OFF//).Causes: Feed sensor DRV board LGC board Separation roller Replace it if it is worn out.Description: Paper remaining on the transport path: The multiple feeding of preceding paper caused the misfeeding of upcoming paper.Remedy: Finisher Check if the connector on the equipment is disconnected from the finisher or the harnesses are open circuited.Description: Ready time time-out jam: The equipment judges that the paper transport to the finisher is disabled because of the communication error between the equipment and finisher at the start of printing.The stack exit roller home position sensor (S13) does not detect that the exit roller is at the upper position after the stack exit roller shift motor (M6) has been driven in the specified time when the exit roller is moved up. Remedy: The stack exit roller home position sensor (S13) does not detect that the exit roller is not at the upper position after the stack exit roller motor (M6) has been driven in the specified time when the exit roller is moved down.Causes: Stack exit roller shift motor (M6) Stack exit roller home position sensor (S13).Description: Stack exit roller nip home position detection error.Check if the conductor pattern on the LGC board is short circuited or open circuited.Check if the harness connecting the finisher and LGC board is open circuited.

Check if the harness connecting the I/F connector of the finisher side and LGC board is open circuited.Check if the voltage (24V) is being supplied to the finisher.Description: Receiving time time-out jam: The printing has been interrupted because of the communication error between the equipment and finisher when the paper is transported from the equipment to the finisher.

E studio 3555 separation roller